Na'urar gwajin zafin jiki mai ɗorewa
Ayyukan samfur da manufa
Motar AC ana amfani da ita don yin lodi, kuma ana amfani da ita ne don gwada kaddarorin injina kamar karko da kuma ƙarshen canjin kayayyaki da samfura daban-daban a yanayin zafi.Yana iya gane haɗakar umarnin sarrafa damuwa, damuwa, saurin gudu, da sauransu. Dangane da ka'idodin gwaji kamar GB, HB, SO, ASTM, DIN, JIS, da sauransu, sigogi kamar matsakaicin ƙarfin gwaji, karye ƙarfi, lokacin karko, da sauransu. Za'a iya samun tsayin wurin zama mai canzawa ta atomatik.
Bayani dalla-dalla
| T e s t i gm a c h i n e t y p e | EHDR-5104 | EHDR-5304 | EHDR-5504 | EHDR-5105 |
| Load (KN) | 10 | 30 | 50 | 100 |
| Gwajin Ma'aunin Ƙarfin Ƙarfin (FS) | 0.4% - 100%. | |||
| Gwada kuskuren tilastawa | Ƙasa a cikin 0.5% | |||
| Kewayon auna nakasawa (FS | 0.2% zuwa 100% | |||
| Kuskuren lalacewa | A cikin ± 0.5% | |||
| Kuskuren lokaci | A cikin ± 0.1% | |||
| Coaxiality | A cikin 8% | |||
| Yawan sarrafa damuwa | (0.005 ~ 5)% FS/s, cikin ± 0.5% | |||
| Yawan sarrafa ƙaura | (0.05 ~ 100) mm/min, tsakanin ± 0.5% | |||
| High zafin jiki tanderu irin uku mataki drum makera, uku mataki bude makera | ||||
| Lura: Kamfanin yana da haƙƙin haɓaka kayan aiki, sabuntawa ba tare da sanarwa ba, ba da izinin neman cikakkun bayanai lokacin tuntuɓar . | ||||
Ma'aunin injin gwaji
1. Ya hadu da bukatun GB / t2611-2007 janar fasaha bukatun ga gwajin inji, GB / t16826-2008 electrohydraulic servo duniya gwajin inji da JB / t9379-2002 fasaha yanayi ga tashin hankali matsawa gajiya gwaji inji;
2. Haɗu da GB / t3075-2008 Hanyar gwajin gajiya na ƙarfe axial, GB / t228-2010 kayan ƙarfe na ƙarfe na ƙarfe a cikin yanayin zafin jiki, da sauransu;
3. Yana da amfani ga GB, JIS, ASTM, DIN da sauran ka'idoji.
Nunin masana'anta
Takaddun shaida
