Na'urar gwajin torsion na lantarki

Ya dace don gwada ƙarfin ƙarfi da aikin torsional na ƙwaya masu kullewa.Abubuwan da ke cikin gwajin sun haɗa da jujjuyawar kullewa, jujjuyawar jujjuyawar ƙarfi, ƙarfin haɓakawa da sassauta jujjuyawar, da dai sauransu. Ƙunƙarar kulle tana nufin matsakaicin ƙarfin juzu'i yayin aiwatar da jujjuyawar, kuma ana iya saita yankin samfur;juzu'in kwancewa yana nufin jujjuyawar juzu'i a ƙarƙashin babu nauyin axial, wato, matsakaicin matsakaici ko mafi ƙarancin juzu'i a cikin yanki mai cirewa, kuma ana iya saita wurin samfurin.Za'a iya samun ma'auni kamar jimlar ma'aunin gogayya µtotal, sigar gogayya ta zaren µthread, madaidaicin juzu'i na ƙarshen µendface, da maƙarƙashiya coefficient K.

Aika mana imel

Cikakken Bayani

Tags samfurin

Bayani dalla-dalla

测试机器类型	Saukewa: EHLN-5504-202	Saukewa: EHLN-5205-502	Saukewa: EHLN-5505-203
最大拉力 (kN)	50	200	500
最大扭矩（Nm）	200	500	2000
测量范围	0.2 ⇳ 100%
测量准确性	优于指示值±1%、±0.5%
速度范围(./分钟)	0.01~360（可扩展至720）或非标定制
张力、扭矩分辨率	未分级和恒定分辨率 ±1/300000FS（满量程）
螺栓规格（mm)	M3 至 12	M6 ~ 20	M8 ~ 32
螺栓长度(毫米)	20 到 100	20 ~ 150	40 ~ 200
主机电机功率 (千瓦)	1.0 KW	2.OKW	3. OKW

Ma'aunin injin gwaji

1. An kera na'urar gwaji bisa ga JB / T 9370-1999 "Sharuɗɗan Fasaha don Injin Gwajin Torsion".

2. Na'urar gwajin ta dogara ne akan GB / T10128-1998 "Tsarin Gwaji na Ƙarfe na Ƙarfe", GJB715.13 "Tsarin Gwaji don Ƙirƙirar Ƙarfafa Ƙwararru", MIL-STD-1312, Test16 "Tsarin Gwajin Gyara" da sauran ka'idoji Gudanar da gwaje-gwaje don samar da bayanai.

3. Na'urar gwaji kuma na iya gudanar da gwaje-gwaje da kuma samar da bayanai bisa ga ƙa'idodin Turai kamar EN-14399-1: 2005, EN-14399-3～6: 2006 da ISO 898-1: 1999.